The Kit Includes the custom built tank, filter, filter cartridge and air pump, custom light, light switch, 6 foot power cord, adjustment bolts, wire connectors, wire ties, aquarium setup and care instructions.
A link to the online instruction video will be provided upon purchase so you can get started disassembling and modifying your iMac while your kit shipps!
Required Tools - flathead and phillips head screwdrivers, hammer, wire cutter, wire brush or sandpaper, electrical tape, Dremel or similar rotary carving tool with carving bit to remove plastic, hot glue gun. If you wish to polish scratches out of your case you will need a high speed drill, 6 inch buffing pad, buffing compound, soft cloth, plastic wax or polish.
Follow Instructions At Your Own Risk! - It is possible for the CRT monitor in an iMac to hold thousands of volts of electricity. If you are uneasy about removing the electronics inside of your iMac please have your CRT monitor discharged by a professional. In the disassembly video I offer instructions on how to discharge the CRT yourself but please note that you are following these instructions At Your Own Risk and I will not be held responsible for any injury or accidents that may occur to anyone while following any instructions I offer. Please take all safety precautions. More information on discharging a CRT can be found at the following link. http://www.wikihow.com/Discharge-a-CRT-Monitor
**The iMacAquarium light and filter operate on U.S. Standard electrical plug and 110/120 volts. The aquarium and filter combined use 20 watts. Depending on your countries electrical standards an additional voltage converter may be required.**